I was excited to hear that they were finally exposed to the problem first hand. I was anxious to hear what the solution would be. Unfortunatly, it was something that I refer to as "tinkering".
In previous posts, I've referred to this mill as something that we've been able to cut with, as long as we've been willing to spend a considerable amount of time "tinkering". There are a few different things that typically happen during "tinker time".
1. raise the mill head all the way up. loosen the bolts that hold the stabilizer tube. slide each tube down until they are snug on the bottom of the frame. Tighten the bolts.
2. clean and lubricate the stabilizer tubes
3. use a wire brush to clean out the wheels on the eject side and remove wet sawdust from the eject side of the mill tracks.
4. recheck blade tension and blade guide alignment.
5, if the ground is wet or a parucularly heavy log has been dogged up, recheck track straightness.
Since installing the "shake fix" brackets at the bottom, we do not have to constantly adjust the tube and bring it back down to the bottom of the track. The sandwitching plates hold it where it needs to be. In fact, in cases where it starts to shake, backing the upper screw off the stabilizer tube seems to soften it up.
Still looking for a solution that allows us to start the mill in the morning and cut all day w/o using tools for anything other than changing blades. If we could make Tinker Time a thing of the past, we'd be headed down the right path!
Nice information on here, I would like to share with you all my experience trying to get a loan to expand my Clothing Business here in Malaysia. It was really hard on my business going down due to my little short time illness then when I got heal I needed a fund to set it up again for me to begin so I came across Mr Benjamin a loan consultant officer at Le_Meridian Funding Service He asked me of my business project and I told him i already owned One and i just needed loan of 200,000.00 USD he gave me form to fill and I did also he asked me of my Valid ID in few days They did the transfer and my loan was granted. I really want to appreciate there effort also try to get this to anyone looking for business loan or other financial issues to Contact Le_Meridian Funding Service On Email: lfdsloans@lemeridianfds.com / lfdsloans@outlook.com He also available on WhatsApp Contact:+1-9893943740.
ReplyDelete